Goantifraud
Cisco SPA122: Settings
Cisco SPA122: Settings
21-Oct-2016 09:20

Cisco SPA122: Settings

corporate

Cisco SPA122 is a fairly popular model of VoIP adapter, which it possible to quickly organize telephone IP-based network in a small office or home environment. To function properly, you must set it up correctly.

Preparatory stage

To start with, you need to connect the WAN cable to the Internet connector and the network card of your PC to the Ethernet jack. Cisco SPA122 has two ports for connecting analog telephones. To connect your phone device to the adapter, use the Phone connectors.

Now you need to enter the IVR menu. To do this, type 4 "stars" on your analog phone. Then type a combination of 110 # to listen to the IP-address assigned to your Cisco SPA122. If your phone does not work in the tone mode, add "a star" before 110 and the "pound"

Setting up via the web interface

Cisco spa122 is set up through the web interface. You need to open a browser on your computer, to which you connect the adapter. Type 192.168.15.1 in the address bar of the device set by default. Sometimes you fail to connect, in this case, we recommend making ure that the proxy server is off.

You should turn a web server function on. Find Access Management in the Administration menu and put two permissive flags. This will allow you to remotely control the device, as well as update the firmware in the future.

To perform a basic setup, you'll need to enter your login and password prompted by Cisco SPA122. "Admin admin" is set by default in the device are. Then you can change the password in the Administration tab.

Are you interested in VoIP technology? Are you looking for a reliable start-up in the telecommunications sector? You will be interested in the opportunity to start a GSM termination business. You can get the maximum profit making the minimal investment! We offer a turnkey GoAntiFraud solution for beginners, which includes opportunities for efficient VoIP termination, as well as a set of equipment by GoIP, EjoinTech & China Skyline at low cost.

It is necessary to specify the parameters “static IP address”, “NetMask” and “Gateway”. These data can be obtained from your ISP, if Cisco SPA122 adapter uses a separate line. You also need to specify the values of the Primary and Secondary DNS, and then click "Submit".

You should specify the range of 17,000 to 30,000 for the RTP in the SIP-> Voice menu. In the core SIP settings you must make sure that the UDP protocol is used for the transmission. For the parameters of SIP Port and EXT SIP port, the port 5060 is set up by default, but you should check this with your SIP-provider. The provider should also give you information for Proxy setting (this is the same what the SIP-server is).

In the Audio Configuration, select g711a/g711u codec. Now you just have to fill in the Subscriber Information menu:

Password: The password for your account to be provided by your VoIP provider;

Auth ID: leave blank;

User ID: Login to your SIP account;

Use Auth ID: put "No".

Now your voip gsm adapter Cisco SPA122 is ready for operation.

GoAntiFraud offers you to start a profitable GSM termination business! If you are interested in VoIP technology, we will help you start your own business, yielding a stable income. By purchasing our comprehensive New Business package, you will start making money immediately! We will give you full technical support at all stages of business.
ejointech
2339
0/5
0
votes

Related Articles

GoAntiFraud

Efficient VoIP-telephony for a Call Center

17 Aug 2016 11:14
Some managers dream of creating their own call center. To do this, you need to expand your office and install additional telephone lines. It is known it is very expensive when you employ conventional telephony because the call center can have 100 or more lines. In this case, the best alternatives ar...
GoAntiFraud

Should You Rent a GSM gateway?

25 Aug 2016 13:00
Starting a business in the field of GSM voice traffic termination, a beginner is faced with the question: which is better - to buy or rent VoIP equipment? Of course, first of all, it depends on the amount of your starting capital. If the possibility of the initial investment is minimum, terminator s...
GoAntiFraud

Services of the VoIP providers as a way to save the company budget

13 May 2016 08:17
The issue of increasing the profitability of the company is acute for a senior manager. You can increase your company's revenues in two ways: Smart savings; Higher earnings. Practice shows that the cost savings can significantly increase the company’s profits. However, it is importa...
GoAntiFraud

Compact Solutions to Connect the Traditional Telephony to the GSM Network

06 Jul 2016 12:43
Many companies currently connect their analog phone lines to GSM networks using software PBX. This requires a good, functional solution - e.g., a GSM gateway for voip termination or a GSM board. If you need to organize several PBX for companies, for example - the branch network, an important require...
GoAntiFraud

Start of Work With VoIP Equipment

22 Aug 2016 15:08
Beginners, who are familiarizing with VoIP technologies, do not yet know many nuances of the organization of the Internet telephony. Some of them are willing to save and connect the Huawei 3G modem of series E1550, E160g, E173, and E1752C. But, according to experts, it is better to install the gatew...
GoAntiFraud

How to Connect Several Cities via IP

16 Aug 2016 13:15
Executives of companies are successfully developing their businesses, expanding it, opening up branches in other countries and cities. And then they face a quite important question of whether to use the cloud or to set up the equipment. After all, the result of such actions should be efficient commu...
GoAntiFraud

SIP Adapter is a Convenient VoIP Solution

23 Mar 2017 16:27
More and more managers of enterprises do not want to spend money on expensive equipment when organizing VoIP telephony. Many use a SIP adapter, which is a device that costs less than a gateway and does not require a complex installation. Such equipment operates using the SIP Internet protocol, than...
GoAntiFraud

IAX Type Connection of Two Servers

08 Sep 2016 12:36
Connecting two servers using IAX type is a convenient way for the termination, allowing you to place the equipment in different cities. However, construction of build VoIP server cannot be practically carried out by anyone without problems. When calling, an error is usually indicated in the messa...

GoAntiFraud

GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud